Top 10 Piv Badge Holder – Badge Holders

As an Amazon Associate I earn from qualifying purchases.

1. ID Stronghold

#ad

USA Molded and Assembled, Duolite 2 Card ID Holder, Heavy Duty Hard Plastic ID Badge Holder, Poly Carbonate, RFID Blocking Secure Badge Holder, Black, ID Stronghold, FIPS 201 Approved

#ad
ID Stronghold #ad - Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards. Indestructible: Molded from Poly Carbonate for military level toughness and durability. Usa designed, molded and assembled - Our slim polycarbonate frame is tough as nails and will last you for years!2 card holder: conveniently carry two key cards, held tight so you never lose your identification. Slim design: looks sharp and available in 9 colors to match your uniform, work or business attire.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.31 Inches
Length4 Inches
Weight0.04 Pounds
Width2.38 Inches
Part NumberIDSH2004-001B
ModelIDSH2004-001B

2. Elimoons

#ad

Holds 2 Card, 3 Pack- Heavy Duty ID Badge Holder by Elimoons, Hard Plastic Clear Holder with Thumb Slots

#ad
Elimoons #ad - Features: thumb notches on both sides make it easy to remove ID card from the holder, vertical top-load format keeps your badge from loss. What you get : 3 packs badge holders in a bag, each one can hold at least 2 cards.

It accommodates 2 cards for you. Dimension: heavy duty badge holder size w x l: 2. 5 x 3. 4 inch, card slot size w x l: 2 x 3. 4 inch, 5 mm in thickness. Retractable cord, 23. 6 inch cord extension. Material: made of frosted plastic to prevent glare off of your photo ID badge and from scratches. Retractable badge reel size: 2 1/8 inch l x 1 3/8 inch w. Usage: slot hole on back for easy attachment to badge reels, lanyards, strap clip, etc. Perfect for office keycards, cac, smart piv, and All Standard 8030 Proxy Cards Drivers License / Credit Card Size.
BrandElimoons #ad
ManufacturerElimoons #ad
Height0.7 Inches
Length5 Inches
Width5 Inches
Part Numberzt-mskt3p

3. OneSquare

#ad

Six, Stainless Steel Necklace with Archangel Michael Wings, Badge Shield Holder | Interchangeable faceplates for Five, and Circle Shields | Leather Wrapped Steel Belt Clip, Seven Point Star Badges

#ad
OneSquare #ad - Law enforcement gear recessed leather badge holder/ holster construction: Thick Cow Hide Construction with Heavy Duty Stitching, Accompanied by 1 Stainless Steel Ball Chain Necklace for Badge Holder to be Worn Around Neck. For that little Extra Needed Backup. Concealed arch angel michael wings: sits behind your fbi, army, police, nYPD, Repossession, Law Enforcement, SWAT, military official, Concealed Weapons Permit, SIGMA, Fugitive Recovery, Security Officer, detective, delta, Captain Badge etc.

One holder, 6 pointed star shield, fits so many badge sizes: our unique interchangeable hook and loop recessed faceplates fit multiple star Badges Including the 5 Pointed Star Shield, 7 Pointed Star Shield and Many Circle Shields. Great for unique law enforcement Gifts: Comes in Velvet Badge Holster Gift Bag.

Please make sure your badge is the same type pictured in our post to assure proper fit. We did our very best to make this badge Holder as Universal as Possible While Not Compromising on Design or User Comfort. Badge holder with belt clip: integrated heavy duty leather Encased Steel Belt Clip that Provides Protection Against Badge Clip Edges in an Unexpected Chest Impact Situation When Wearing Around the Neck. Fit measurements- 5 point star badge: 2. 58''w x 2. 73''h - 6 point star badge: 2.
BrandOneSquare #ad
ManufacturerOneSquare #ad
Height3.13 Inches
Length3.25 Inches
Weight0.23 Pounds
Width0.25 Inches
Part Numbercirclebadge1011
Modelcirclebadge1011

4. ID Stronghold

#ad

Heavy Duty Hard Plastic ID Badge Holder, USA Molded and Assembled, Identity Stronghold, FIPS 201 Approved RFID Blocking Security, Secure RFID Badge Holder for 1 Card, Black

#ad
ID Stronghold #ad - Indestructible: Molded from Poly Carbonate for military level toughness and durability. Squeeze to read: pinch the top to temporarily remove your card from the shielding and gain access. Usa made: molded and Assembled by our expert team in Florida facilities, millions shipped worldwide. Rfid shielded: protect your credentials with our FIPS201 Approved badge holder, for 13. 56mhz cards. Ergonomic: looks sharp and available in 9 colors to match your uniform, work or business attire.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height0.5 Inches
Length4.5 Inches
Width2.75 Inches
Part NumberIDSH1004-001B

5. GOVO

#ad

Durable Polycarbonate ID Card Holder Holds 1 to 4 Cards Black, GOVO Badge Holder, Without Clip Version

#ad
GOVO #ad - Designed and engineered by govo in ohio, usa. Built to last: the eyelet for connecting to lanyard or carabiner is made from manganese steel making it strong and durable.

Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity. This is the light weight without-clip version of govo t4 badge Holder. You can carry your credit cards, driver license and work ID all in one in this compact holder. The spring holds cards on the sides so it won’t damage your cards or let them slip out. Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards. It weights 1. 2 oz. Unlike plastic retainer, metal spring does not lose elasticity. The holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners.
BrandGOVO #ad
ManufacturerGOVO #ad
Part NumberNC_90000

6. Pawfly

#ad

Heavy Duty Frosted Polycarbonate Plastic Clamp Grippers, Pawfly 5 Pack Vertical Half Card Badge Holder for Swipe Smart ID Cards

#ad
Pawfly #ad - Holds 1 standard credit card sized 2-1/8 by 3-3/8 inch vertically. Does not fit for thicker cards. Heavy duty frosted rigid Poly-carbonate plastic that built sturdy and solid for daily use. Half card design allows magnetic stripe stays exposed for convenient swiping, great for ID access cards, swipe cards and smart cards. Inset your card into place, 3 strong grips will firmly grab and holds it securely. Easily swipe your access card without removing from badge holder, allows unobstructed view of your ID.
BrandPawfly #ad
ManufacturerPawfly #ad
Part NumberPawfly-UL403

7. GOVO

#ad

GOVO Badge Holder/Wallet, Durable Polycarbonate ID/Credit Holder with Metal Clip and 4 Cards Slot Holds 1to 4 Cards Black

#ad
GOVO #ad - Doubles as a wallet: the govo t4 can be used as a wallet thanks to its’ 4 cards capacity. You can carry your credit cards, driver license and work ID all in one in this compact holder. Designed and engineered by govo in ohio, usa.

Durable and light weight: the holder’s body and screen are made from 2mm thick polycarbonate and secured by steel fasteners. Unlike plastic retainer, metal spring does not lose elasticity. Patented clip: the first and only badge holder with a metal clip allow you to carry your ID on your belt, key chain, pocket, backpack or a lanyard. The spring holds cards on the sides so it won’t damage your cards or let them slip out.

Weights 1. 4 oz. Patented spring-loaded card holding system: it holds cards well no matter it is loaded with 1 card or 4 cards. The steel clip can also be used as a cash clip. The opening on top of the clip is designed for connecting to lanyard or carabiner. The clip is made from manganese steel making it strong and durable.
BrandGOVO #ad
ManufacturerGOVO #ad
Height0.38 Inches
Length3.8 Inches
Weight0.08 Pounds
Width2.6 Inches
Part NumberGOVO_BK_P

8. Specialist ID

#ad

Specialist ID Black Dual Card ID Badge Holder, Rigid Hard Plastic, Holds 2 Cards

#ad
Specialist ID #ad - Slim & lightweight but heavy duty - a popular choice for police, cac, security, twic, Military, Even Office and Medical - Compatible with Prox, Driver's License, Membership Cards, Work Access Badges, Hotel Key Cards Etc. Works in both horizontal and vertical display. Slot holes work with your clips - lanyards, Badge Reels and More! Specialist id quality - SPID-AH150 Holds two cards - holds 2 standard Credit Card Size ID Cards 1 Front/1Back.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Height0.3 Inches
Length3.7 Inches
Weight0.03 Pounds
Width3 Inches
Part NumberSPID-AH150-X
ModelSPID-AH150

9. ID Stronghold

#ad

Heavy Duty Plastic Badge Protector, FIPS 201 Approved, ID Stronghold Secure Badge Holder Duolite, PIV, RFID Blocking 2 Card ID Badge Holder with Lanyard and Retractable Reel, CAC and Work Cards

#ad
ID Stronghold #ad - Lanyard & reel included - 36 x 3/8" Lanyard with J Hook & Carabiner Retractable Badge Reel. Rfid shielded - protect your contactless cards from electronic pickpockets with the industry's best. Usa designed, molded and assembled - our slim polycarbonate frame is tough as nails and will last you for years! 2 card holder - securely holds one card on each side so both cards are easily displayed. Id stronghold is the original rfid blocking Company with FIPS 201 Approval for all our ID holders.
BrandID Stronghold #ad
ManufacturerID Stronghold #ad
Height1 Inches
Length5 Inches
Weight0.09 Pounds
Width4 Inches
Part NumberIDSH2047

10. Specialist ID

#ad

Hard Plastic with Heavy Duty Breakaway Lanyard w Quick Release Metal Clip & Key Ring One Holder / 3 Cards Inside Black, Specialist ID Vertical Top Load Three Card Badge Holder

#ad
Specialist ID #ad - Rigid & rugged polycarbonate plastic - hard plastic vertical format i. D. Carry all your cards in one holder - tough multi-card protector holds common access smartCards and Proxy Key-cards in One Case - Perfect for When Needed on a Regular Basis FAA, TSA, Military, Port Authority, Security Access, Customs, and Department of Homeland Security.

Badgeholder with heavy duty safety break away neck cord lanyard - Protect Your Valuable Access, PIV, CAC, TWIC or Government Employee Name Badge from Damage and Loss. Quick release lanyard with safety breakaway clasp - features a detachable keychain with Metal Badge Clip - Carries Your Work Badges and Keys.

Clear front window - front badge has visible display for picture ID’s, Dual Thumb Lever on the Back Can Slide up Smart Chip Cards or Swipe & RFID Prox Access Cardbadges. Top loading & fully enclosed for 2 - 3 cards - all cards load from Top of Sturdy Rigid Case Can Hold 3 Standard CR80 30 Credit / Drivers License Sized Badges.
BrandSpecialist ID #ad
ManufacturerSpecialist ID #ad
Height1.1 Inches
Length4.4 Inches
Weight0.1 Pounds
Width2.8 Inches
Part NumberSPID-9070
ModelSPID-9070