Legacy Woodturning, Pen Bushings, for Slimline Style Pens, Colors Vary


The Instrument Store Slimline_Bushings - These bushings are for use with Legacy Pen Kits but will fit other kits from other manufacturers. To be used with a 7mm Woodturning Mandrel. Pen kits, blanks and drill bits are sold separately. Select above from more than 25 different bushings. These are bushings which are used with a woodturning pen madrel for making hand truned pen and pencils.

See the additional photos for bushing dimensions nominal. You should match the bushing to the type of pen/pencil style that you are making. The perfect match for "Legacy Woodturning" brand kits, sold separately. Set of bushings used to make Legacy Slimline and Fancy Pens on a woodturning lathe.

More information about The Instrument Store Slimline_Bushings

Hold Fast Non-Stick Bushings for CA Pen Finishing Original Version


TMI Products - No more bushings glued to your newly turned pen. To use, replace the bushings with the 60° cones, simply remove your turned pen barrel once you have performed your final sanding, remount the barrel onto your lathe, and apply your CA finish. Material will not stick to pen barrels. Make finishing easier. No more bushings glued to barrels.

Tmi has created 60° hold fast cone bushings made from a nonstick material that will allow you to apply a CA finish safely and easily without adhering the pen bushings to the pen barrels. No more glued together barrels and bushings.

More information about TMI Products


Similar products



Purple Heart, Zebrawood, Sapele, Walnut, Padauk by White's Woods - Pen Blank


White's Woods - Pen blank - purple heart, Walnut, Sapele, Zebrawood, Padauk.10 pack. No more bushings glued to barrels. Each blank is at least 3/4 squared by 5" long and has been kiln dried" Make finishing easier. Material will not stick to pen barrels. This pack of pen blanks contains the following species: Purple Heart, Zebrawood, Walnut, Sapele, Padauk.

More information about White's Woods


Similar products



Legacy Woodturning, Pen Mill / Barrel Trimmer For Pen Kits, Choose your Size


The Instrument Store PenMill_7mm - Material will not stick to pen barrels. Use for necessary pen kit projects. Pen barrel trimmer for Pens using 7mm tubes. Pen blank - purple heart, Walnut, Zebrawood, Sapele, Padauk.10 pack. Legacy 7mm Pen Mill. Includes 7mm pilot shaft and 3/4" Steel Cutter. For pens using 7mm tubes. Includes 7mm pilot shaft and 3/4" Steel Cutter with hex key.

No more bushings glued to barrels. Make finishing easier.

More information about The Instrument Store PenMill_7mm


Similar products



Slimline Pen Kit 10-Pack, Mix


Crooked Mill Crooked Mill - Pen blanks pictured: Crooked Mill 9-Pack Wood Blanks. Includes 10 pen kits each a different color/style, 1 set of bushings, and instructions. Includes 7mm pilot shaft and 3/4" Steel Cutter with hex key. Pen blank - purple heart, Zebrawood, Walnut, Sapele, Padauk.10 pack. For pens using 7mm tubes. No more bushings glued to barrels.

Requires 7mm drill bit. Material will not stick to pen barrels. Legacy 7mm Pen Mill. Ballpoint twist pen with a slim, comfortable design. Includes 10 pen kits each a different color/style, 1 set of bushings, and instructions Make finishing easier. Pen blanks not included.

More information about Crooked Mill Crooked Mill


Similar products



Milescraft 4700 Turners Press for Joining Pens and Other Turned Projects of All Types


Milescraft Inc. 4700 - Pen blank - purple heart, Zebrawood, Sapele, Walnut, Padauk.10 pack. Six half-circle metal stanchions are located beneath the spring-loaded mandrel opposite the pressure arm. Ballpoint twist pen with a slim, comfortable design. Material will not stick to pen barrels. The mandrel is spring-loaded, so it pushes stacked components against the pressure arm, holding them in alignment during set up.

Micro adjustable pressure pad for fine tuned length adjustments. One or more can be quickly and easily flipped up under the mandrel, preventing it from bowing in any direction when pressure is applied during assembly. The pressure used on any one assembly is precisely calibrated using the fine threaded micro-adjustment pad.

Milescraft 4700 Turners Press for Joining Pens and Other Turned Projects of All Types - Includes 7mm pilot shaft and 3/4" Steel Cutter with hex key. Make finishing easier. Steel handle and pivot delivers up to 300 pounds of force. Wide metal base sits in place or clamps/installs onto workbench. Pen blanks pictured: Crooked Mill 9-Pack Wood Blanks. Exclusive flip-up support stanchions ensure easy setup and horizontal component assembly, eliminating splitting of delicate components.

Requires 7mm drill bit.

More information about Milescraft Inc. 4700


Similar products



Legacy Woodturning, 7mm Brad Point Drill Bit


The Instrument Store 7mm_Brad_Point_Drill_Bit - This is a 7mm high speed steel drill bit with brad point. Ballpoint twist pen with a slim, comfortable design. Material will not stick to pen barrels. It could also be used for many other purposes. Spring loaded self-feeding mandrel holds objects in position during set up. Hole size: 7mm. For pens using 7mm tubes.

Exclusive flip-up support stanchions ensure easy setup and horizontal component assembly, eliminating splitting of delicate components. Includes 10 pen kits each a different color/style, 1 set of bushings, and instructions. Pen blanks pictured: Crooked Mill 9-Pack Wood Blanks. Wide metal base sits in place or clamps/installs onto workbench.

Legacy Woodturning, 7mm Brad Point Drill Bit - It is used for drilling out pen/pencil blanks while making hand turned pens. Pen blanks not included. Includes 7mm pilot shaft and 3/4" Steel Cutter with hex key. Shank size 6. 92mm/. 272" length 143. 3mm/5. 6".

More information about The Instrument Store 7mm_Brad_Point_Drill_Bit


Similar products



Legacy Woodturning, Slimline Pen Kit, Many Finishes, Multi-Packs


The Instrument Store Slimline_Gun_Metal_10 - Pen blank - purple heart, Walnut, Zebrawood, Sapele, Padauk.10 pack. Slimline bushings will fit this kit; Bushings and blanks sold separately. Legacy slimline Pen Kits are our most popular pen kit. Legacy 7mm Pen Mill. Includes 10 pen kits each a different color/style, 1 set of bushings, and instructions. Type of steel: High Speed Steel.

Wide metal base sits in place or clamps/installs onto workbench. Slimline twist pen kits have locking refill mechanisms that accept Cross style refills. Pen blanks pictured: Crooked Mill 9-Pack Wood Blanks. Exclusive flip-up support stanchions ensure easy setup and horizontal component assembly, eliminating splitting of delicate components.

Legacy Woodturning, Slimline Pen Kit, Many Finishes, Multi-Packs - These are compatible with other Slimline Pen kits. No more bushings glued to barrels. Drill sizes used: 7mm; compatible Tube Sizes: 7mm; Skill Level: Very Easy. They are used by new pen turners but also seasoned veterans alike. For pens using 7mm tubes. Steel handle and pivot delivers up to 300 pounds of force.

Requires 7mm drill bit.

More information about The Instrument Store Slimline_Gun_Metal_10


Similar products



Legacy Woodturning, Slimline Pen Kit, Many Finishes, Multi-Packs


The Instrument Store Slimline_Gold_10 - For pens using 7mm tubes. Material will not stick to pen barrels. Type: ballpoint Twist Pen. Includes 10 pen kits each a different color/style, 1 set of bushings, and instructions. No more bushings glued to barrels. Wide metal base sits in place or clamps/installs onto workbench. Drill sizes used: 7mm; compatible Tube Sizes: 7mm; Skill Level: Very Easy.

Pen blanks pictured: Crooked Mill 9-Pack Wood Blanks. Micro adjustable pressure pad for fine tuned length adjustments. Slimline bushings will fit this kit; Bushings and blanks sold separately. Blank size: 9/16 x 2-1/32; Refill Type: Cross Style. Exclusive flip-up support stanchions ensure easy setup and horizontal component assembly, eliminating splitting of delicate components.

Legacy Woodturning, Slimline Pen Kit, Many Finishes, Multi-Packs - Hole size: 7mm. We recommend slimline pen kits for turners who are just starting out because the techniques and skills learned to create them can be easily transferred to other turning projects. Legacy 7mm Pen Mill. Drill sizes used: 7mm; compatible Tube Sizes: 7mm; Skill Level: Very Easy. They are used by new pen turners but also seasoned veterans alike.

Type of steel: High Speed Steel.

More information about The Instrument Store Slimline_Gold_10


Similar products



Legacy Woodturning, Fancy Pen Kit, Many Finishes, Multi-Packs


The Instrument Store Fancy_Gun_Metal_10 - Wide metal base sits in place or clamps/installs onto workbench. Legacy 7mm Pen Mill. Type: ballpoint Twist Pen Mechanism. Bushings: slimline; blank size: minimum ½" x 2-1/32"; Refill Type: Cross Style. Includes 7mm pilot shaft and 3/4" Steel Cutter with hex key. Finish: 24kt Gold. Requires 7mm drill bit. Pen blanks pictured: Crooked Mill 9-Pack Wood Blanks.

They are loved by new pen turners as well as seasoned veterans. Type: ballpoint Twist Pen. Offered in a large variety of finishes. Finish: Gun Metal. Pen blank - purple heart, Zebrawood, Sapele, Walnut, Padauk.10 pack. Blank size: 9/16 x 2-1/32; Refill Type: Cross Style. No more bushings glued to barrels. Drill sizes used: 7mm; Compatible Tube Sizes: 7mm.

Legacy Woodturning, Fancy Pen Kit, Many Finishes, Multi-Packs - Type of steel: High Speed Steel. This fancy pen Kit will make a great gift. Slimline bushings will fit this kit; Bushings and blanks sold separately. Micro adjustable pressure pad for fine tuned length adjustments.

More information about The Instrument Store Fancy_Gun_Metal_10


Similar products



18 Pieces - Micro-Mesh 2" Assortment Pack


Micro-Surface P310 - Spring loaded self-feeding mandrel holds objects in position during set up. 18 color coded foam backed abrasive pads - 2 each grit. Pen blanks pictured: Crooked Mill 9-Pack Wood Blanks. Drill sizes used: 7mm; compatible Tube Sizes: 7mm; Skill Level: Very Easy. Hole size: 7mm. Micro adjustable pressure pad for fine tuned length adjustments.

Requires 7mm drill bit. Assortment pack contain 2 each:soft touch micro mesh pad 1500 grit soft touch micro mesh pad 1800 gritsoft touch micro mesh pad 2400 gritsoft touch micro Mesh Pad 3200 gritSoft Touch Micro Mesh Pad 3600 grit Soft Touch Micro Mesh Pad 4000 gritSoft Touch Micro Mesh Pad 6000 grit Soft Touch Micro Mesh Pad 8000 grit Soft Touch Micro Mesh Pad 12000 grit Make finishing easier.

18 Pieces - Micro-Mesh 2" Assortment Pack - Type: ballpoint Twist Pen. Ballpoint twist pen with a slim, comfortable design. Pen blank - purple heart, Sapele, Zebrawood, Walnut, Padauk.10 pack. Type of steel: High Speed Steel. Works great on surfaces that include stabilized woods, acrylics and solid surface materials. Remarkable hi-gloss, scratch free shine.

Blank size: 9/16 x 2-1/32; Refill Type: Cross Style.

More information about Micro-Surface P310


Similar products